Ideal for limiting access in high-traffic areas. Heavy duty cylindrical lock housing conforms to DOD 5220.22M. Door thickness 1-3/8" to 2-1/4". Non-handed Field reversible. Minimum stile required for mounting 5". Dimensions - front housing 7-3/8"L x 3-1/8"W x 3-13/16"D. Latch/Backset: UL/ULC 3hr rated 1/2" throw latch bolt with 2-3/4" backset and floating faceplate. Key override models accept removable core cylinders. Removable core cylinders not supplied with lock. Stock in satin chrome.

1011:

Exterior access by combination. Egress by interior knob.

EE1011/E1011:

Combination entry both sides.

1021:

Exterior access by combination or key override. Egress by interior knob. Cores not included, stock in satin chrome.

1031:

Exterior access by combination or passage feature. Interior has passage feature - thumbturn & key. Egress by interior knob.

1041:

Exterior access by key combination, key override or passage feature. Interior has passage feature - thumbturn & key. Egress by interior knob. Cores not included.

Key Override:

Allows a facility to maintain or initiate a keyed-alike security system with the same key system already in use. The key is normally only iin the hands of security or management personnel and will override the lock's combination to gain entry.

Passage Feature:

Allows access without using the entry code (keeps the door unlocked even while closed). this function is on the inside of the door, and can be activated by either a thumbturn or a key (Thumbturn and key included with all passage feature models).

1000 series mechanical knob push-button locks are available with a variety of functions including standard push-button entry, combination both-side push-button entry, keyed overide function or a switch to passage function. Lock Surgeon's shop parts service locksmith can consult with you to determine the correct push-button combination lock that will best work on your warehouse, business, lunchroom or shop.

Kaba-Unican L-1000 Series Lever Push-button Locks

L-1000 series mechanical lever push-button lock used where lever handle is preferred over ball knob

L1000 Series Lever Push-button Locks:

Designed for high frequency use, wherever limited access is required. Single access code, one easy-to-manage code for all users. Easily programmed via keypad. Door thickness 1-3/8" to 2-1/4". Weather resistant. Vandal resistant, solid metal push-buttons. Backset 2-3/4". 1/2" throw latch. 3hr UL/ULC fire rating on "A" labeled doors. Minimum stile 5". Removable core cylinders not supplied with lock.

L1001:

Exterior access by combination. Egress by interior lever.

L1021:

Exterior access by combination or key override. Egress by interior lever.

L1031:

Exterior access by combination or passage. Interior access without using the lock entry code: Activated from the inside with a thumbturn or key. Egress by interior lever.

Passage Set Option:

The key cylinder (A), shown is the standard control for changing combinations on the Kaba Simplex series 1000 & L1000. the optional passage set (B), shown below the key cylinder in the image above, allows the lock to be opened without using the push-button combination. This is valuable when a door is to be left unlocked for extended periods. The optional passage set comes ordered with a thumbturn activator, as shown, or with a key cylinder activator.

Lever handles are preferred to allow for handicap access and/or easy access when hands are full of other materials. Available in combination code entry, combination code entry with passage, combination code entry with key-overide. Lock Surgeon's lockSmith handle hardware experts can provide the push-button lever handle and installation instructions for your steel door.

Dormakaba kaba LP1000-series Exit Device Control Lever Push-button Lock To Work With Panic Bar

Specially designed to work with panic bars and push-pad exit devices

LP1000 Series Exit Device Control Lever Push-button Locks:

Replaces key cylinder on new or existing surface mounted exit devices. Single access code, one easy-to-manage code for all users. Operation modes - push-button access, and exit device may be "dogged" without affecting the LP1000. Easily programmed via the keypad. Vandal resistant, solid metal push-buttons. Exit device hub rotation up to 60º, counterclockwise for left hand and clockwise for right hand. Tailpiece 2-3/4" tailpiece for exit device operation from outside. Minimum stile 5". Door thickness 1-3/8" to 2-1/4". Weather resistant.

3hr UL/ULC fire rating for "A" labeled doors. Finish satin chrome. Compatible with most leading brands of rim exit devices (exit device not included): Black & Decker(k-12) QED111/112, Cal Royal 5000/F5000, Detex Advantex Series 10 20 21 40 50 or 51, Detex 10/F10 series, Dorex 8500R/8500F, Dorex 9100 or 9300, Monarch XXR FXXR or 18R, F18R 17R F17R XXV FXXV 18V F18V FXXV 11R 11V*, Von duprin 22 88NL 98 99 900 2227 9827 9847 9847WDC 9848 9857 9927 9947 9947WDC 9948 9957 90027 90047WDC 90057. *(requires special K-Hub Adapter Kit).

2015 Series Exit Device Control Lever Push-button Lock:

Single access code, easily programmed via keypad. 6 pin tumbler cylinder keys for combination change access. Minimum stile 3-1/8". Non-handed. 2-3/4" adjustable tailpiece for exit device operation from outside. Exit device hub rotation: Adjustable up to 90º clockwise for right hand. Weather resistant.

Compatible with most leading brands of rim exit device (exit not included): American Device 6300 6303 series, Corbin Russwin 21 22 25 26NT 27K 29 29-1/4 29M2 29-1/2M2 29NTM2 29D20 LA29 39 39EL 39LLD 390 LA39 365 3651/4 LT365 370 372 LA372 375 LT375 377 382 384 385 388 572 572EL 572ELD U572 LA572, Detex Advantex series 10 20 21 40 50 51, Dorex 8500R/8500F, Dorex 9500R/9500FR, Magno Krom LHR only 500-4 550-4 650-4 1500-4 1550-4 1650-4 RHR only 600-3, Monarch 18RBA 18RP 18VP F18RBA F18RP F18VP FXXRBA FXXRP FXXVP XXRBA XXRP XXVP, Precision Hardware FL-D103 RHRB only 810-H RH or LH 103 R103 D203 H-203 1103 D1203 H1203, Sargent 2813 2804 6804 12-6804 9804RHRB 12-9804LHRB 9898E 9898K, Von Duprin 22 Rim, 22 Rim-F 88 Rim 88 Rim-F 98 Rim 98 Rim-F 99 Rim 99 Rim-F 2227 2227-F 9827 9827-F 9847 9847-F 9927-F 9947-F, Yale 1500, 7000 series.

This digital entry system will work with the following panic bar brands: Black and Decker, Cal Royal, Detex, Dorex, Dorma, Monarch and Von Duprin. Ask Lock Surgeon's in-shop service technicians to pair the appropriate panic bar to this push-button entry system.

Dormakaba Kaba 3000 Series Narrow Stile Push-button Locks & 3000 Series Extra Heavy Duty Push-button Locks

Narrow stile push-button lock for glass-aluminum door

3000 Series Narrow Stile Push-button Locks:

Provides exterior access by combination entry, key override, passage and lockout. Works with Adams Rite 4510/4710/4910 mortise latch. Single access code. Easily programmed via keypad. Non-handed, field reversible. Accepts Maximum Security (MS) mortise cylinders. Vandal resistant, solid metal push-buttons. Minimum stile width 1-7/8". Door thickness 1-3/4". Cylinder not included. Drive assembly required.

5000 Series Extra Heavy Duty Push-button Locks:

Ideal for controlling access to high traffic, security sensitive areas in commercial, industrial, educational, governmental, lodging and multi unit residential setting. Perfect for locations with a high user turnover rate such as data processing centres, employee entrances R&D labs, apartments, dormitories and restricted areas in hospitals and airports.

Single access code, one easy-to-manage code for all users. key override. Easily programmed via keypad. ANSI/BHMA A156.2 Grade 1 certified. Weather resistant, indoor/outdoor approved. 3hr UL/ULC fire rating for "A" label doors. Vandal resistant, metal push-buttons. Non-handed. Door thickness 1-3/8" to 2-1/4". Minimum stile 5". Backset 2-3/4". 1/2" throw latch, floating faceplate. Tailpieces for compatibility with: Abloy 5277, Abloy 5477, Arrow C100, ASSA 65611, ASSA 65691, Corbin Russwin 2000-03, Kaba 1539, Kaba 1599, Kaba Gemini 4730, Kaba Peaks 1099, Marks, Medeco 20W200H1, Sargent 10 line, Schlage 23-001, Shlage Primus 20-760.

Narrow stile push-button lock designed to work on storefront doors that restrict access such as, accounting office, sales office, doctors office. Installation consultation of this push-button lock can be provided by Locksmiths that work for Lock Surgeon.

Kaba Push-button Combination Lock Parts

Parts for worn or broken push-button locks

Service Repair Kits & Spy Shield:

These repair kits have almost everything you need to completely repair a Unican mechanical lockset in the field, including chamber, springs, and other parts.

Lock Surgeon's shop service technicians can repair your lock at one of our locksmith parts centres or consult with our in-store locksmiths about the part or replacement options.

Kaba Push-button Deadlatch Deadbolt & Spring Parts

Replacement parts for commercial Kaba push-button digital entry

Push-button Service Parts

Deadlatches, deadbolts, springs, tail-pieces and service parts for Kaba push-button digital entry.

Von Duprin 22-series Exit-device &Trim

Panic bar push-pad style by Von Duprin and trims to match your lock and door needs

22 Series Exit Device:

22 rim exit device for all types of single and double doors with mullion. UL listed for panic exit hardware. Rim cylinder (not supplied) retracts latch. Rated devices are ANSI A156.3-2001 Grade 1. Covers stock hollow metal doors with 161 cutouts. Device ships ready for all functions; EO, DT, NL, TP, K, L. Non-handed. Device lengths -3'. Supplied with 299 dull black strike. Dogging feature: Hex key dogging standard (non-fire rated). Deadlocking latch bolt 3/4" throw (22EO & 22EO-F).

Minimum door opening 1/2" stop: 26-1/2". Minimum door stile width: 3-13/16".

22EO-F:

Minimum door opening 1/2" stop:26-1/2". Minimum door stile width: 4-3/8". Fire rated.

2227EO:

Minimum door opening 1/2" stop: 25-7/8". Minimum door stile width: 4-3/8". Door height: 7'.

22 Series Trims:

210K28: Escutcheon plate size 3" x 4-25/32" x 3/32". Includes cylinder.

230L SP28:

Escutcheon plate size 3" x 6-3/8" x 15/16". Cylinder not included.

230TP/230NL SP28/230TP BE SP28:

Pull centre 5-1/2". Escutcheon plate size 3" x 12-1/16" x 3/32". Cylinder not included.

Von Duprin standard panic bar, fire-rated panic bar and verticle rod panic bars with the push-pad style are the go to for our Lock Surgeon hardware parts service centre team. Door trims also known as exterior handle combinations are available in a number of style functions: ball knob, lever, thumb-press, thumb-press with lock or night latch.

Von Duprin 44 & 88 Series Exit Device & Accessories

Von Duprin 44 and 88 panic bar and accessories

44 Series Exit Devices:

44EO: Non-handed economical exit device is supplied with single door 299 strike. Device will fit 1-3/4" thick doors and is field sizeable from 2'6" to 4' wide doors. Rim cylinder (not supplied) retracts latch. Sprayed aluminum finish. Supplied with 299 dull black strike. Dogging feature: Hex key dogging standard. Deadlocking latch bolt 3/4" throw. cUL listed 266M panic hardware.

44TP:

Like 44EO bar but supplied with gripset that is operated by rim cylinder, which locks or unlocks the 2 part thumbpiece. Size of handle is 2" x 9-5/8".

Note: No replacement parts are available for the 44 series exit devices.

88 Series Exit Devices & Accessories:

Conforms to ANSI A156.3-1989 Grade 1. For all types of single and double doors, UL listed for accident hazard installations. Covers stock hollow metal doors with 86 or 161 cutouts. Standard cross bar length: 42", fits doors up to 48" (field sizeable). Door thickness 1-3/4". Non-handed. Hex key dogging. Finish - Satin chrome with stainless steel cross bar.

88EO:

Heavy duty rim mounted exit device. 3/4" throw latch bolt. Accepts rim cylinder for retraction of latch (not supplied).

88TP:

Same as 88EO with thumbpiece that can be locked an unlocked by use of rim cylinder (not supplied).

8827:

5/8" throw latch bolt. Fits door stiles as narrow as 3-1/2".

880TP:

Requires rim cylinder for operation (not supplied). Escutcheon size 3" x 14-3/16" x 3/32".

050101/050102:

Converts any standard 88 series rim exit device.

The Von Duprin 44 exit device is an older-style unit, not often used today. The 88 series exit device also found in older situations available with verticle rod, night-latch or keyed-thumb-piece trim, standard bar style or surface mount verticle rod.

Von Duprin 98 & 99 Series Exit Device & Trim

Grade 1 Panic bar, Von Duprin 98 and 99 series exit device and trim are made to last

98/99 Series Exit Devices:

Devices are equipped with a fluid dampener which decelerates the pushpad on its return stroke and eliminates most noise associated with exit device operations. Rim devices are equipped with a deadlocking latchbolt. ANSI A156.3-2001 Grade 1 UL listed. Non-handed. Dogging feature: Hex key dogging standard (non fire rated). Devices are 3' long can be field sized for doors from 2'4" to 3' wide. Rim mount devices supplied with 299 surface strike. Supplied with mounting hardware for 1-3/4" to 2-1/4" thick doors. Vertical devices are for 7' high doors with 5/8" deadlocking latches. Centre case dimensions 8" x 2-3/4" x 2-3/8".

98/99 Series Exit Device Trims:

Cylinder not included, pull centre 5-1/2", all stocked in satin chrome 990DT 26D/990NL RV26D.

990TP BE/990TP R26D/992L R/V 06 LHR 626/996L06 626

Escutcheon plate size 2-3/4" x 10-3/4" x 27/32".

996L - 996L Breakaway trim

Effective in areas where vandalism to door hardware is a problem, non-handed.

Heavy duty grade 1 panic bar used in governement buildings, apartments, law offices, and anywhere heavy use and quality panic bars are required. Available in fire-rated series with trims such as dummy-trim, night-latch, thumb-piece or lever handle.

Von Duprin Narrow Stile Exit Devices, Electronic Latch Retraction Kits & Accessories

Narrow Stile Exit Devices, ELR Kits & Accessories

33A & 35A Series Narrow Stile Exit Device:

Devices are equipped with a fluid dampener which decelerates the pushpad on its return stroke and eliminates most noise associated with exit device operations. Equipped with a deadlocking latchbolt to provide additional security and improved performance. For all types fo single and double doors with mullion. Non-handed for left and right handed doors. Dogging fixture hex key dogging standard. Fits door stiles as narrow as 1-3/4". Devices are 3' long, can be field sized for doors from 2'4" to 3' wide. Rim mount devices supplied with 1439 roller strike. Supplied case dimensions: 8-3/16" x 2-13/32" x 1-9/16". ANSI A156.3-1994 Grade 1 UL Listed.

Electric Latch Retraction Kits & Accessories:

050070 - Electric latch retraction (ELR) conversion kit for 33, 35, 98, & 98 series 3' exit devices. Requires PS914 & 900 2RS power supply to function.

050251 00

Field installable request to exit (RX) switch signals access control systems when pushpad is depressed. For 22, 33, 35, 98 & 99 devices.

EPT10

Electric power transfer conducts current from the frame to the edge of a swinging door. Fully concealed when door is closed. Ten 24 gauge wires up to 1amp at 24VDC with a 16amp maximum surge.

PS914

size 14"H x 12"W x 4"D. Output 4A at 12/24 VDC output, field selectable with jumper. Universal 120-240 VAC input. Designed with high in rush current for powering electrified panic devices. Low voltage DC, regulated and filtered. UL listed 294.

900 2RS

2 relay EL panic device control board for use with the PS914 power supply. Recommended for use with 914 when powering an EL device. Required for use with 914 when powering 2 EL devices.

Von Duprin Panic Bar Exit Device Parts & Accessories

Parts and accessories for Von Duprin Panic Bar

98/99 Series Accessories:

Retrofit alarm kit for 99 devices to deter unauthorized use of an opening. ALK kit contains an 85 decibel internal horn: when the touch bar is depressed the horn sounds to signal that the opening has been violated. Alarm kit can be armed or disarmed by key. Uses a standard 1-1/4" mortise cylinder with a straight cam (not supplied). Operates on one standard 9 volt alkaline battery. Furnished with an RX-request to exit switch. Includes "EMERGENCY EXIT ONLY, ALARM WILL SOUND" decal. It is recommended to use the non stock ALK-LX kit when used in conjunction with surface mount vertical exit devices.

050115:

Retrofit kit for cylinder dogging on 98/99 devices (except fire rate) to replace the standard hex key dogging unit. Requires a 1-1/4" mortise cylinder with straight cam (not supplied).

Talk to Lock Surgeon's lock smith service counter staff about what your needs are for parts to repair this popular brand of product.

Flush Bolt, Surface Bolts & Roller Latch

Flush Bolt, Surface Bolts & Roller Latches

Constant Latching Flush Bolt

Constant latching - inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when closed. Low actuation forces. Fits standard ANSI A115.4 door and frame preparations. Non-handed. 3/4" bolt throw with a 7/8" vertical adjustment. 3/4" backset. Standard rod length is 12", which is measured from the centre of the flush bolt body to the bolt tip. Body size - 1"W x 6-3/4"L x 2"D. Meets ANSI A156.3 type 27. UL Listed 3hr fire doors 8'0" x 10'0".

Surface Bolts

Standard surface bolt has 1" throw for maximum security. Ideal for all types of doors. Fully concealed mounting prevents vandalism. Available in locking version: Unit locks both the up and down position - locking bolts are furnished with 2 keys in 4 keying variations. Units packed with wood and machine screws to meet most field conditions. Units available with either a universal top strike (T) or a flat bottom strike (B) in height. Meets ANSI/BHMA A156.16, L84161. Sex bolts available where required.

Roller Latch

Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed. The projection of the roller is easily adjusted using adjusting screws on the face of the unit. Maximum projection of the roller is 3/8" allowing for variance in the door clearance. Nylon roller standard. Forged brass construction. Meets ANSI/BHMA A156.16, E19091.

MLF Series Mortise Locks

Grade 1 MLF Series Mortise Locks

MLF Series Mortise Locks

LSDA moritse locks provide exceptional strength and durability to any door. Typically used in hospitals, schools and commercial buildings. They are well-suited to heavy use environments. Designed to fit standard Type 86 full-moritse cutouts, and equipped with an escutcheon trim, these locks are excellent for new projects and retrofits. The lever trim meets ADA standards for accessibility. Several functions are available, some with integral deadbolt. Mortise locks offer functions that cannot be obtained using cylindrical "key-in-knob" locksets. ANSI/BHMA A156.13-2005 Series 1000, Grade 1. UL10C; UBC 7-2-1997. Heavy-duty full-case mortise lock.

Oversize escutcheons, ideal for retrofit. Individual lever return springs prevent sagging. UL Listed for 3hr fire doors. Supplied with SC4 1-1/4" mortise cylinder. Cylinders used for this mortise lock must be 1-1/4" length mortise cylinder. Deadbolt - 1" bolt projection. Latch - 3/4" projection. Supplied with a mortise cylinder except passage and privacy functions locks. Door thickness 1-3/4". Door preparation full mortise, see template. Escutcheons 2-1/2"W x 8-1/4"H. "Quick Change" handing is field reversible. Strike 4-7/8" x 1-1/4". Backset 2-3/4". Construction: forged brass levers and escutcheons, zinc chromate steel case, brass latchbolts. Style is Ann Arbor. Finish in Satin Chrome.

MLF01 - Passage:

Latch retracted by lever on either side.

MLF04 - Entrance:

Lock or unlock ooutside lever using rocker on edge of lock. When locked, inside lever retracts latch, outside access by key.

MLF05 - Classroom:

Lock or unlock outside lever by key on outside of the door. When locked, inside lever retracts latch.

MLF07 - Storeroom:

Inside lever always retracts latch. Outside lever never retracts latch, outside key retracts latch.

MLF12 - Apartment/Dormitory/Exit With Rocker:

Latch is retracted by either lever unless outside lever is locked by rocker. In addition , a deadbolt can be projected or retracted by key outside or thumbturn inside. Also, operating inside lever retracts both latch and deadbolt, while outside lever remains locked.

MLF13 - Apartment/Dormitory/Exit Without Rocker:

Both levers always retract latch. Deadbolt can be projected and retracted by key outside or thumbturn inside. Also, operating inside lever retracts both latch and deadbolt.

MLF19 - Privacy:

Both levers always retract latch. Deadbolt can be projected and retracted by thumbturn inside or emergency release outside. Also, operating inside lever retracts latch and deadbolt.

MLF48 - Storeroom with Deadbolt:

Inside lever always retracts and deadbolt if it is extended. Outside lever is rigid, outside cylinder retracts latch, and deadbolt if it is extended. Deadbolt is extended or retracted by inside thumbturn or by outside cylinder.

This mortise lever cassette is available in: Passage, entrance, classroom, storeroom, apartment dormitory exit lock with rocker, apartment dormitory exit lock with no rocker, privacy and storeroom with deadbolt.

Universal Combination Cylinders & Neuter Bow Key Blanks

Universal Combination Cylinders & Neuter Bow Key Blanks

Universal Combination Cylinders:

Meets ANSI/BHMA A156.5 Series Grade 1. Operates most Grade 1 & 2 locksets and leversets including Arrow D, E, F, K Schlage B100, B400 and H Series deadlocks as well as many other locksets such as LSDA. One piece OEM quality tailpieces. Drilled 6, pinned 5 standard. Rekeyable to original manufacturer's system. Manufactured from solid brass. Screw cap fastening of the plug facilitates ease of keying. All stocked with 26D (Satin Chrome) plug faces. Composite (comp) works with Schlage C-K & 1170C (Hollymade).

Neuter Bow Key Blanks:

Large head lacquered brass blanks. Embossed face with LSDA and "Do Not Duplicate". Meets original manufacturer tolerances.

Concealed Circuit Single Acting Spring & Full Mortise Interim Hinges

Concealed Circuit, Single Acting Spring & Full Mortise Interim hinges

Concealed Circuit Electric Hinge:

An intermediate connector which passes a constant flow of current between the source of power(jamb) and the actuated devices in the door. 28 gauge multi-strand wire with 12" long leeds. Available with 2 or 4 circuits. 1 Amp, 24 volts maximum each circuit continuous duty, 16.0 amps intermittent duty (pulse) for 300 milliseconds. Electric feature undetectable when hinge is installed.

Full Mortise Single Acting Standard Weight Spring Hinge:

Non-handed hinge series has infinite adjustments with the tension being added or reduced by means of provided hex key. Locking screw provides tamper-resistance after the proper tension has been set. Nylon tee bearings for vertical and lateral loads. Coil spring provides closing power. Steel base material polished and plated.

Full Mortise Interim Hinge:

For a new or retrofit installation. An equal amount is trimmed from the top and bottom of the leaf. Interim hinges are supplied with a no hole bottom plug and the pin is held in place by an NRP set screw which allows the hinge to be reversible. Steel base material.

Hinges are available in a variety of sizes and functions to work with your commercial warehouse door or storefront door. Lock Surgeon's hardware parts ad service centres stocks a variety of products to meet your door hinge needs.

Half Surface Plain Bearing & Full Mortise Bearing Hinges

Half Surface Plain Bearing & Full Mortise Bearing Hinges

Five Knuckle Standard Weight Series Half Surface Plain Bearing Hinge:

Recommend for use on minimum frequency and/or light weight wood or stock hollow metal doors in residences, apartments or other very low frequency doors in commercial construction. Surface mounted on door, mortised frame. Steel base material polished and plated.

Five Knuckle Standard Weight Series full Mortise Steel Bearing Hinge:

Bearing hinge. Steel based polished and plated. Recommended for standard weight doors or doors with closing devices. NRP: Non-removable pin prevents removal of hinge pin when door is closed.

Five Knuckle Standard Weight Series Full Mortise Bearing Hinge:

Recommended for standard weight, medium frequency doors, or doors with closing devices. Steel base polished and plated. NRP: Non-removable pin prevents removal of hinge pin when door is closed.

Five Knuckle Heavy Weight Series Full Mortise Bearing Hinge:

Stainless steel base polished and brushed chrome plated. Recommended for use on high frequency and/or heavy wood or metal doors in schools, hospitals or other public buildings where heavy traffic is experienced. NRP: Non-removable pin prevents removal of pin when door is closed.

Astragals Brush Sweeps & Gasketing

T-Astragal is ideal for steel commercial double-door weatherstrip

Astragals:

Astragals and meeting stiles on double doors often present problems because of complex conditions and requirements. Punched with slotted holes for adjustment. All stocked clear anodized, 84" long with brush products being supplied with gray brush.

18061 & 357:

Fire rated.

18061:

BMHA certified

Brush Sweep Gasketing:

All UV stabilized brush seals consist of densely compressed nylon filaments encased in high quality aluminum retainers. Suitable for hollow metal and wood door applications. All brush seals greatly reduce the infiltration of light, air, wind, rain and snow while preventing loss as well as controlling the penetration of smoke and fumes. Supplied with #6 x 5/8" stainless steel sheet metal screws. The dense nylon filaments conform to the contours of every sealing surface, providing a superior seal with extremely low closing force. Brush remains flexible down to -40ºC and has a melting point above +205ºC. Punched with slotted holes for adjustment. Stocked in clear anodized or dark anodized with black brush.

Perimeter Gasketing

Rigid jamb weatherstrip shown mounted on openings with 1/16" gaps; however stocked weatherstrip can seal gaps up to the 1/4", the depth of the seal material. Punched on 6" centres with lotted holes for adjustment. Stainless steel fasteners are standard. Fire-rated. 312: BHMA certified.

Brush-sweep works for glass-aluminium doors, perimeter gasket kit designed for standard commercial steel doors. Weatherstrip can be purchased at one of Lock Surgeon's weatherstrip sales and service centres.

Automatic Door Bottom Seal, Door Sweeps, Adhesive Smoke-Fire Gasket, Door Louvres

Door Bottoms, Perimeter Gasketing & Louvers

Door Bottoms:

Automatic door bottoms consist of aluminum case which surrounds the movable drop-bar seal. The patented plunger mechanism engages on the hinge side first to actuate the dro-bar seal; this feature prevents the seal from skidding along the floor/threshold while the door is being closed. Sponge neoprene seals up to 3/4" gap under the door. Can be trimmed by up to 2". Fire-rated. 315 & 4131: BHMA certifed.

Adhesive Smoke/Fire Gasketing:

Excellent resistance to compression set, particularly at elevated temperatures and for extended periods of time. Stays felxible between -40ºC and 121ºC with very high resistance to flex fatigue. Seal begins compressing at 3/16" and compresses to seal up to a 1/16" gap. Outstanding ozone resistance rating. Smoke tested in accordance with UL1784-01; meets the requirements of NFPA 105 - Standard for the installation of smoke door assemblies and other opening protectives. Designed for tighter frames with extremely low closing force. Stocked as a 20' coiled length.

Door Louvres:

Construction 18 GA. Steel frame with 22 GA. Steel louver blades primed grey. For 1-3/4" thick interior doors. By supplying 50% air flow these louvres are ideal for air exchange.

Not all weatherstrip is the same, call and talk to one of Lock Surgeon's shop counter lock smith staff to discuss your commercial weatherstrip needs.

Storefront Frame Repair Kit, Deadbolt Guard & Frame Repair Plate

Storefront Frame Repair Kit, Deadbolt Guard & Frame Repair Plate

Storefront Frame Repair Kit:

Finish - Durable powder coat. Affixed with 3/16" pop rivets (supplied). Size 6"H x 1-3/4"W with 1" mounting flange.

Deadbolt Guards:

For outswing doors. Protects against vise grips, hammers & punches & crowbars. Lip overlap protects door frame. Completely covers many tubular deadbolts.

Frame Repair Plate:

Spanning 7' this frame reinforcer repairs damaged frames as well as provides additional security for intact frames. Molding on inside of frame must be removed to install product correctly.

4 Series commercial Duty Centreline Electric Strikes & 4 Series Faceplates

4 Series Electric Strikes

4 Series Commercial Duty Centreline Electric Strikes:

Body only, faceplates sold separately. ANSI-size faceplate: 1-1/4" x 4-7/8". Accommodates 3/4" latch projection (pullman design not included). Enlarged latch cavity width allows compatibility with cylindrical and centreline mortise locks (including 3-piece anti-friction type) and mortise exit devices. 1-1/2" cut-out depth accommodates most aluminum and hollow metal frames. Use with wide range of door thicknesses: 1-3/8" to 2-3/8". AC/DC input acceptable for all fail secure models. Fully reversible for right or left-hand doors. Standard mounting tabs and fasteners included. Unique anti-vibration design prevents manipulation by vibration. Finish: stainless steel. UL 1034 burglary resistant - highest level 1000 lbs of static strength. Meets ANSI/BHMA A156.31 Grade 1. Non-handed.

4 Series Faceplates:

B4714 - For 4114:

Use with centreline exit devices, cylindrical or centreline mortise locks. 1-1/4" x 4-7/8".

B4704 - For 4104:

Use with aluminum, cylindrical or centreline moritse locks and centreline exit devices. 1-1/4" x 4-7/8".

B4705 - For 4105:

Use with centreline exit devices, aluminum, cylindrical or centreline morits locks. 1-1/8" x 5-7/8".

B4707 - For 4107:

Use with aluminum locks, cylindrical or centreline mortise locks and mortise exit devices. 1-1/4" x 6-7/8"

B4708 - For 4108:

Use with aluminum locks, cylindrical or centreline mortise locks and cenreline exit devices. 1-7/16" x 7-15/16".

F4 & 7 Series Fire-rated commercial Duty Centreline Electric Strikes

F4 & 7 Series Electric Strikes

F4 Series Fire Rated Commercial Duty Centreline Electric Strikes:

for extra-strength in heavy-duty applications and is fire labeled. Unique anti-vibration design prevents manipulation by vibration. Crossed wires are never a problem as the coil is not polarity-conscious. Accommodates 3/4" latch projection (pullman design not included). Enlarged latch cavity width allows compatibility with cylindrical, and centreline moritse locks (including 3-piece anti-friction type) and mortise exit devices. 1-1/2" cut-out dpth accommodates most aluminum and hollow metal frames. Door thicknesses 1-3/8" to 2-3/8". AC/DC input acceptable for all fail secure models. Fully reversible for right or left-hand doors. Standard mounting tabs and fasteners included. ANSI/BHMA A156.31 Grade 1. UL Listed UL 10C fire rated 1.5hr. UL 1034 burglary resistant - highest level 1,000 lbs static strength. ANSI stainless steel faceplate 1-1/4" x 4-7/8". Stainless steel finish.

7 Series Adjustable Electric Strikes:

Body only, faceplates sold separately. RCI's 7 Series electric strikes allow installers to adjust the strike pivot horiszontally for precise alignment. Unique anit-vibration design prevents manipulation by vibration. Crossed wires are never a problem, as the coil is non polarity-concious. Accomodates 5/8" latch protection (pullman design not included). Unique anti-vibration design prevents manipulation by vibration. Enlarged latch cavity width allows compatibility with cylindrical, narrowline aluminum and centreline mortise locks (including 3-piece anti-friction type). 1-1/2" cut out depth accommodates most aluminum and wood frames. Door thickness: 1-3/8" to 2-3/8". AC/DC input acceptable for fail secure modles. Fail secure. Non-handed. Standard mounting tabs, fasteners, and trip plate included. 1/8" horizontal adjustment. UL listing: UL 1034 burglary resistant, 500lbs of static strength. Modular Design.

7 Series Electric Strikes Faceplates, JIG, & 5 Series Electric Strike

7 Series Electric Strikes Faceplates, JIG, & 5 Series Electric Strike

7 Series Faceplates:

B4714 - For 7114:

Use with centreline exit devices, cylindrical or centreline mortise locks. 1-1/4" x 4-7/8"

B4704 - For 7104:

Use with aluminum, cylindrical or centreline mortise locks and centreline exit devices. 1-1/4" x 4-7/8".

B4705 - For 7105:

Use with centreline exit devices, aluminum, cylindrical or centreline mortise locks. 1-1/8" x 5-7/8".

B4707 - For 7107:

Use with aluminum locks, cylindrical or centreline mortise locks and mortise exit devices.

B4708 - For 7108:

Use with aluminum locks, cylindrical or centreline mortise locks and centreline exit devices. 1-7/16" x 7-15/16".

4 & 7 Series Frame Prep Jig:

Improves installation accuracy, and aids in cutting of aluminum or metal frames. Frame prep jig for ANSI-sized electric strike. For series 4104/4304, 4114/4314, 7104/7304 or 7114/7314.

RCI Rutherford Controls 6 Series Heavy Duty Universal Electric Strikes & Universal Electric Faceplates

Universal electric strike standard body or low-profile body

6 Series Heavy Duty Universal Electric Strikes:

Body only, faceplates sold separately. Field selectable lock mode - choose fail secure or fail safe with the turn of a dial (fail secure mode requires DC voltage). Field selectable voltage input - accommodates 12 or 24VDC, and 12 to 24VAC, and even 16VAC in one strike. Low profile version (L) is shallow enough for use with narrow stile aluminum frames only 1-1/16" deep, standard version (S) requires 1-3/16" frame depth. 1/4" horizontal adjustment. Modular "plug-in" wire connectors for fast hook-up. Tested to over 1,000,000 cycles. UL listed 1034 burglary resistant, 1500lbs of static strength. Modular "plug-in" wire connectors for fast hook-up.

AS65LMKM:

The latch monitor is a SPDT switch with a trigger in the strike cavity to indicate the presence of a latch bolt when the door is closed. The keeper monitor is a SPDT switch that will indicate when the keeper moves from the closed (normal) postition to the open position. NOTE: LMKM switches are rated at 2amps at 24VDC.

6 Series Universal Strike Faceplates:

B614 32D - For S6514 - Standard/L6514-Low

Use with centreline exit devices, cylindrical or centreline mortise locks. 1-1/4" x 4-7/8".

B604 32D - For S6504-Standard/L6504-Low:

Use with aluminum, cylindrical or centreline morise locks and centreline exit devices. 1-1/4" x 4-7/8".

B605 32D - For S6505-Standard/L6505-Low

Use with aluminum locks, cylindrical or centreline mortise locks and mortise exit devices. 1-1/4" x 6-7/8".

B608 32D - For S6508-Standard/L6508-Low

Use with aluminum locks, cylindrical or centreline exit devices. 1-7/16" x 7-15/16".

This electric strike is the go-to preferred electric strike by our mobile installation team. Field selectable voltage input accommodatess 12 or 24 VDC, 12 to 24 VAC and even 16 VAC in one strike. Choose fail-secure or fail-safe with the turn of a dial. Fail-secure mode requires DC voltage. Lock Surgeon's electric strike service counter technician can recommend the appropriate electric strike that will be accepted in your door frame to replace your current electric strike with a new electric strike that will match your apartment or business needs.

F2 Series Fire Rated & 15 Series Economy Electric Strikes

F2 Series Fire Rated & 15 Series Economy Electric Strikes

F2 Series Fire Rated Commercial Duty Centreline Electric strikes:

Modular design allows compatibility with most locks without having to order special faceplates. Includes offset and centreline faceplates. Adjustable deadbolt keeper deadlatch ramp. Heavy-duty stainless steel construction. Fits HES 1006 (1003) frome cutout. Accommodates 3/4" latch projection. Faceplate and anti-tamper security screws included for centreline latch entry. Unique sliding shim design for up to 1/8" (3mm) horizontal adjustment for misaligned frames. Vertical adjustability of strike for precise postioning of lockset. Accommodates up to 1" deadbolt; night-latch function only, bolt will not release. Field selectable voltage input - accommodates 12 or 24VDC and 12 to 24VAC.

15 Series Economy Strikes:

For light use with narrowline aluminum cylindrical locks.

15BS:

Replaces Edwards 9. For special offset latch entry. Voltage 11-16 VAC. Size 1-1/4" x 5-7/8". 5/8" latch projection. Fail secure. For hollow metal, aluminum or wood frames. Non-handed.

15CA:

Replaces Peso 710. For centreline latch entry. Voltage 11-16 VAC. Size 1-1/4" x 5-7/8". 5/8" latch projection. Fail Secure. For hollow metal, aluminum or wood frames.

0 Series Rim Electric Strikes

0 Series Rim Electric Strikes

0161 Rim Electric Strikes:

For hollow metal, aluminum or wood frames. Universal design accomodates most manufacturere's exit devices. Accommodates 1/2" to 3/4" Pullman latch projection. Extensive horizontal adjustment. Fully reversible (non-handed). UL 1034 Listed for 1500lbs of static strength, burglary resistant. Size 1-3/4"W x 9"H x 3/4"D. A minimum frame depth of 1-5/8" for surface-mounted installations.

0162 Rim Electric Strikes:

No frame cutting required - surface mounted. Compatible with most major exit devices. Accommodates exit devices with latch projections from 1/2" to 3/4"(13mm - 19mm). Ensure proper latch alignment with horizontal adjustment up to 1/4"(6.4mm) to compensate for door misalignments. Non-handed. Field selectable voltage input - 12 or 24VDC and 12 to 24VAC 9even 11 to 16VAC). Horizontal solenoid prevents manipulation from vibration. Hex socket head cap screws for added support and tamper resistance. Mounting spacer included to provide enhanced latch engagement. UL 1034 Listed for 1500lbs of static strength, burglary resistant. Size 1-3/4"W x 9"H x 3/4"D.

0563 1/2" Rim Electric Strike:

Surface mounted - no frame cutting required. New third wire for cooler operation. Conventional keeper design (one moving part) - promotes even load distribution. Lockdown holes for secure mount. Compatible with most Pullman latch exit devices. Accommodates exit devices with latch projections from 1/2" - 3/4" (13mm - 19mm). Horizontal adjustments ensures proper latch positioning to compensated for door misalignments - up to 1/4" (6.4mm). Non-handed - for use with right and left handed doors. Field selectable voltage input. Low energy - 0.01A(10mA), auto-sensing 12-24VDC. Plug-in wire connector. Hex socket head cap screws for added support and tamper resistance. UL 1034 Listed for 1500lbs of static strength, burglary resistant. Size 1-3/4"W x 9"H x 1/2"D. PoE power friendly.

Magnetic Locks - 8 Series Multimag®, Minimag® & Micromag®

8 Series Multimag® Minimag® & Micromag®

8 Series Multimag®:

1500lbs holding force per magnet. Adjustable keyhole mounting bracket for simplified installation. Adjustable keyhole mounting bracket for simplified installation. Built-in delay (instant release with adjustable relock, programmable from 0-110secs). Field selectable voltage - 12/24VDC. Convenient plug-in wiring terminals. Stabliazing 4-bolt "Drop stop" mag mounting (8-bolt for 8320). MOV surge protection. No residual magnetism. Low energy consumption. Hardened steel armature nut. Self-drilling tek™ fasteners.

8310:

Single outswinging interior or perimeter doors. Size 1-5/8" x 2-7/8" x 10-1/2". Delayed egress electromagnetic lock available by special order: Model DE8310.

DSS Option - Door Status Sensor:

Double outswinging interior or perimeter doors without mullion. Size 1-5/8" x 2-7/8" x 21".

MiniMag® & MicroMag®:

For interior use only. Brushed anodized aluminum finish. Low energy consumption. Field-selectable voltage 12/24VDC. MOV surge protection. Hardened steel armature nut. No residual magnetism. Low profile design.

8360 - Mortise MiniMag®:

Remote lock status - RLS. Holding force 750lbs. 1-1/16" x 1-1/2" x 9".

8371 - Surface MiniMag®:

Holding force 750lbs. 1"x 1-7/8" x 9-3/8".

8375 - Surface MicroMag®:

Holding force 250lbs. 13/16" x 1-1/2" x 6-17/32".

Magnetic Gate Lock, Electronic Cabinet Lock & Power Supply Accessory

8380 Gatemag® magnetic gate lock, Electric Cabinet Lock & 365 day-99 Event Timer

8380 GateMag® Magnetic Gate Lock:

Up to 1500lbs holding force. No residual magnetism. Weather-resistant stainless steel housing. Versatile face or bottom mounting. Built in RLS(remote lock status). Field selectable voltage 12/24VDC. Throughbolt mounting. 6-1/2" wire cable. Conduit fitting 1/2" inside dieameter, 3/4" outside diameter. MOV surge protection. cULus Listed.

Electric Cabinet Lock:

Field selectable fail secure or fail safe assembly. Field selectable dual voltage 12/24VDC operation. Plated (rust-resistant) self adjusting steel locking pin assembly. 440lbs holding force. Low energy consumption (184mA at 12VDC, 90mA at 24VDC). Includes hardware kit. For sliding or swinging cabinet doors. Elongated holes on tongue for adjustable mounting. Dual Monitoring option available by special order: Model 3513DM.

365 Day, 99 Event Timer:

2 momentary or latching SPDT relays to control locks and other electronically controlled devices or circuits. 40 holidays and 99 user events. Automatic voltage selection 12 to 24VAC or DC. Large alpha-numeric Backlit display for easy programming 16 characters by 2 line LCD. Lithium battery included. Ideal for openings requiring scheduled access. Size 3-3/4" x 4-11/16" x 1".

Power Supply & Power Supply Accessories

10 Series 1.5 AMP power supplies, plug & wire-in transformers & rectifier

10 Series 1.5 Amp Power Supplies:

Field selectable voltage 12/24VDC. Exceptional brown out protection. Surge protection input. Class 2 fused DC input. AC and DC visual indication. Precise battery regulation for lead acid batteries. Online batteries provide no drop switch over an AC failure. Form C relay to indicate AC failure.
Input: AC input 115VAC/60Hz. AC visual indicator.
Output: Normal output voltage 12VDC or 24VDC. 1.5amp supply current at 12VDC. 1amp supply current at 24VDC. Thermally protected DC output. AC fail relay. Visual indication. Size 12.5" x 12.5" x 4".
Certifications: UL listed. Access control unit power supply. Power distribution modules and 24V to 12V DC convertor are listed subassamblies.
Applications: To power access control systems. To power electric locking systems. To power electromagnetic locking systems.

Plug & Wire-in Transformers & Rectifier:

T1002/T1008 - Plug-in Transformer:

Plug into standard 115VAC outlet to provide low voltage AC output. Thermally protected to prevent overload due to short. Transformer will need to be replaced once fuse is blown. UL Listed. T1102 - size: 2" x 2-1/4" x 3-1/4", T1108 - size: 2-3/8" x 2" x 2".

T1009 - Wire-in Transformer:

For permanent installations requiring hard wiring. Size: 2-3/8" x 2" x 2".

R10R1 - Bridge Rectifiers:

Bridge rectifier changes AC power source to DC output for DC strikes & mag-locks.

Magstripe™ Card Reader & Standalone Digital Keypads

Series 9 easy-read Magstripe™ card reader & standalone digital keypads

9 Series Easy Read-MagStripe™ Card Reader:

Stainless steel read head. Includes starter pack with master card and 100 enrollment (shadow) cards used to enroll and delete users. Programming of opening time and lock mode is set with master card. Can program up to a maximum of 1,000 cards per reader. Satin chrome finish. Accepts any ANSI standard Track II MagStripe® card such as drivers license or credit card. For internal or external use (-20ºC). Size: 1-3/8"W x 3-1/2"H x 1-3/8"D.

9 Series Standalone Digital Keypads:

9212I/9212ILW:

Keypad programmable. Single gang flush mount design. 120 user capability. Electronics mounted on back of keypad. Stainless steel faceplate. Three LED's to indicate status and provide user with visual PIN entry confirmation. Field selectable 12-24 VAC/VDC.

9212I - Interior Use:

Input trigger for Request-To-Exit (REX) or other open circuit contact. Up to 4 independent outputs assignable by code. All outputs programmable for latched or timed operation. Size: 2-3/4" x 4-1/2" x 1-1/4".

9212ILW - Interior or Exterior Use:

Heavy chrome plated trim ring. Key press feedback via sounder and yellow LED. Built-in assignable sounder. Bi-color Red/Green LED indicates relay status. Size: 3-3/8" x 5-1/8" x 5/8".

9235I - Interior Use:

Accommodates up to 120 users. EEPROM memory ensures programming remains intact when unit is not powered. Secure access codes (4-8 digits). Silent mode (audible annunciation of key presses can be disabled). Progammable lockout. Variable output time delay (1-60 seconds). Interior and exterior models. Surface mount design. 12VDC. Size: 2-3/4" x 4-1/2" x 1-5/32".

Key Switches & Buttons

Tamper Resistant key switches, handicap exit buttons & switches

Tamper Resistant Key Switches:

Extruded clear aluminum 1/4" plate with beveled edges. UL rated switches are SPDT and can be used for Normally Opened (NO) or Normally Closed (NC) applications. Contacts are rated at 3A at 125VAC, 1A at 250VAC. Can mount 2 switches on easy lock-down dual-switch bracket. For 1-1/8" mortise cylinders with straight or clover cams (not supplied). Supplied with spanner screws & wrench.

960:

Size: 3" x 4-3/4".

960N:

Size: 1-5/8" x 4-3/4".

Handicap Exit Buttons & Switches:

Momentary action switch standard.

909:

2-3/8" x 2-3/8". Surface mount under desk or counter for concealment.

916B/916NB:

916B: 3" x 4-3/4".
916NB: 1-5/8" x 4-3/4".
Tamper resistant handicap blank blue button. Ideal for Request-To-Exit (REX) applications. 20 gauge stainless steel faceplate.

917:

2-3/4" x 4-1/2". Easy touch exit push button 12-40 VDC. Totally weatherproof. Solid state/no moving parts. Pressure sensitive.

950HP4/6:

4-1/2" or 6" round. Ideal for Request-To-Exit (REX) applications. Stainless steel faceplate.

Standalone Keypad & Proximity Controllers

Outdoor Mullion Backlit Pin/Proximity standalone controller & Anti-vandal button Pin/proximity standalone controllers

Outdoor Mullion Backlit Pin/Proximity Standalone Controller:

500 dual code users. 2x3 amp relays. 2 inputs with user programmable logic. 2 tri-coloured LED indicators. Fully-potted, meets IP65. 3 user levels and 3 modes of operation. Optical case and back tamper protection. Lockout feature on wrong entries (keypad/card tamper). Input voltage VDC 12-24 VDC; 16-24 VAC. Maximum input current 12VDC at 160mA. Standby input current 12VDC at 95mA. Maximum read range 3.15". Operating temperature: -32ºC to +63ºC. Operating humidity 0 to 95% (non-condensing). Outdoor usage: Weather resistant, meets IP65. Size 5.33L x 1.74"W x 1.12"D.

Anti-Vandal Metal Button PIN/Proximity Standalone Controllers:

500 dual code users. 2x3 amp relays. 2 inputs with user programmable logic. 2 tri-coloured LED indicators. Fully-potted, meets IP65. 3 user levels and 3 modes of operation. Optical case and back tamper protection. Lockout feature on wrong entries (keypad/card tamper). Input voltage VDC: 12-24 VDC; 16-24 VAC. Maximum input current 12 VDC at 160mA. Standby input current 12 VDC at 95mA. Maximum read range: 3.15". Operating temperature: -32ºC to +63ºC. Operating humidity: 0 to 95% (non-condensing). Outdoor usage: Weather resistant, meets IP65. Size: 5.33"L x 1.74"W x 1.12"D.

Anti-Vandal Metal Button PIN/Proximity Standalone Controllers:

500 dual code users. 2x2 amp relays. 3 user levels and 3 operation modes. Selectable PIN code length 4-8 digits. Auxiliary input and auxiliary output. Input for Request-To-Exit (REX) button. 2 tri-coloured LED indicators. Fully-potted, meets IP65. Optical case and back tamper protection. Lockout feature on wrong entries (keypad/card tamper). Terminal block interface for wiring. Maximum relay current 2A. Operating temperatures: -20ºC to +65ºC. Weather resistant, meets IP54. Size: 4.72"L x 2.8"W x 1.17"D. Rugged Metal Construction.

AC Q41H:

Pin only. Input voltage VDC: 12-24VDC; VAC: 12-24 VDC. Maximum input current 12VDC at 100mA. Standby input current 12VDC at 40mA.

AC Q42H:

Pin/proximity. Input voltage VDC: 12-24 VDC; VAC: 16-24 VDC. Maximum input current 12 VDC at 125mA. Built-in 125 kHz RFID.

KIK, LFIC & Rim Cylinders

6 Line key-in-kob cylinder, 10 Line key-in-knob cylinder, 6300 Large format interchangeable removable core cylinder & 34-Series rim cylinder

6 Line Key-In-Fob Cylinder:

For use with Sargent 6 line series knob locks. 6 pin standard. Supplied with 2 nickel-silver keys. Satin nickel finish.

10 Line Key-In-Fob Cylinder:

For use with Sargent 10 line series; 7 line series & 6500 series. 6 pin standard. Supplied with 2 nickel-silver keys. Satin nickel finish.

6300 Large Format Interchangeable Removable Core Cylinder:

Unassembled core for field rekeying. Includes control sleeve and two key blanks. Springs and pins to be ordered separately. Uncombinated cores.

34 Series Rim Cylinder:

27/32" screw pattern for through-bolted exit devices. Furnished with rosette and compression spring, and "break-off" screws and back plate. 6 pin Horizontal tail piece.

Mortise Cylinders Cam & Key Blanks

40-Series mortise cylinder, 40-Series mortise cam & key blanks

40 Series Mortise Cylinder:

Furnished with rosette and compression spring. Supplied with Sargent standard offset cam. 6 pin standard. Solid brass cylinder. 1-1/8" length.

Key Blanks:

Nickel silver key blanks.

Schlage Mortise Cylinder Cams & Key Blanks

Mortise cylinder cams & key blanks

Mortise Cylinder Cams:

Classic and conventional. Everest an Primus. Modular Cylinder cams.

Key Blanks:

Everest 29 and Primus XP - 6 pin S123, Level 8. Everest 29 - 6 pin S123. Classic - 5 and 6 pin. Control Key blanks C and E.

Von Duprin 5100, 6100 & 6200 Electric Strikes

5100 Multi-function series - 6100 & 6200 heavy duty strikes

5100 Multi-function Series:

Voltage 12 or 24VDC continuous duty. Fail safe or fail secure, easily changed in less than thirty seconds. Includes mounting tabs and neoprene filler plate. 1300lbs of holding strength. Keeper depth of 1/2": Accommodates latches up to 5/8" throw. Tested to over one million cycles. Faceplates included: 4-7/8" ANSI square corner, 7-15/16" long, round corner wood frame prep. Adjustable keeper provides a snug fit and reduces pressure from the door on the strike.

6100 & 6200 Heavy Duty Strikes:

Stainless steel construction. Accepts 3/4" throw latchbolt. Non-handed. Fail secure. Horizontally adjustable. Plug connectors.

6111:

For use with rim exit devices on single doors or double doors with mullion applications. For hollow metal, aluminum or wood.

6112:

For use with rim exit devices on single doors applications. For hollow metal, aluminum or wood.

6211:

Electric strike for use with mortise locks without deadbolt or cylindrical locks on single door, hollow metal frames.

Stop Kick-down, Wind Chain Stop, Latch Guards & ASA Strikes

Miscellaneous Items for Aluminum Glass Doors

Stop Kick Down:

Zinc cast door stop finished in chrome. Size 4-3/4" from pivot point. Furnished with rubber tip.

Wind Chain Stop:

Heavy-duty steel welded chain. Two compression-coil springs. Zinc die-cast mounting brackets. Grey vinyl cover. Finish: zinc plated. Length: 25-1/2".

Latch Guards:

LG111: Non-handed unit for narrow stile aluminum glass doors.
804: Non-handed unit has a cutout for knob rose. Fastened with 4 through-bolts.

ASA Strikes:

Meets the ASA strike specification size of A115.2 of 4-7/8"H x 1-1/4"W. Used for knob & lever sets in commercial applications.

Knob & Lever Guards, Gate Latch, Cabinet Handles & Freezer Handles

Knob and lever guard, secret gate latches, cabinet handles T&L, freezer handles

Knob & Lever Guard:

Designed to prevent "wrenching" of knobs & levers. Made of aircraft aluminum and powder coated for long life. Built-in handle allows the door to easily be opened.

Secret Gate Latch:

For Dutch door applications and counters. Case size is 2" x 2-3/8" with 3/4" strike.

Cabinet Handles - 'T' & 'L':

Handles can be used for a variety of applications including: storage cabinets, locking containers, truck caps & garage doors.

Freezer Handles:

1 0056 L06021: Bolt-type tongue provides positive locking action. Optional adjustable roller strike. Can be locked with a padlock (not included).
1 0173 C00004: Positive latching keeps door shut tight; guards against pop-opens. Cylinder locking with strike. Two-way adjustment compensates for door sag and gasket wear. Replaces discontinued National C8765 unit.

Pad-bolts, Barrel-bolts, Push Plates, Pull Plates & Flush Bolts

Miscellaneous Products for Doors

Padbolts & Barrel Bolts:

168K: 5" extra heavy duty bolt accepts padlock (not included). Padlock hole is 1/2". 1-3/4" bolt-throw.
201A: Solid brass barrel bolt. 19/32" throw. Multiple sizes available.
1068: 4-1/2" heavy duty bolt accepts padlock (not included). Padlock hole is 15/32". 1-3/4" bolt-throw.

Push & Pull Plates:

1410: Push/pull plate combination with 9" pull mounted on a 4" x 16" plate. Aluminum finish.
H1413: Pull handle only.

Flush Bolts:

For keeping the inactive door of a pair of doors stationary. DC840 supplied in pairs. DC860 sold individually.

5" Deadbolt, Deadlatch, Cylinder, Cylinder Guard, Curved Shims & Mailbox Parts

Miscellaneous Parts for Door Deadbolts, Deadlatchs, Cylinders, Cylinder Guards.

Replacement Deadbolt & Deadlatch:

G3 5" Deadbolt for Dorex. Stainless steel. G3 5" Deadlatch for Dorex. Stainless Steel.

Cylnider & Cylinder Guard:

732: 1" cylinder for Adams Rite narrow stile locks supplied with trim ring.
5510: Heavy aluminum plate attaches to door with 4 steel 3/16" pop rivets (included). 1/4" cylinder recess. Measures 4-1/32"H x 1W.

Curved Shims:

Facilitates removing a plug from a cylinder when the original keys are not available. Package of 25.

Riopel Mailbox Parts:

Riopel manufactures a full line of products for residential, commercial, office and institutional buildings. All of these products are available by special order from IDN Canada. Call for technical assistance, shop drawings or pricing.
3950 & 3953: Mailbox includes spring clip for mounting. For 1000, 2000 & 3000 series mailbox units.
R115: Switch box accepts Crown Lock (supplied by Canada Post). Size 6"H x 2-3/8"W.

WARRANTY

Sometimes Things Happen

No one likes it when things go wrong, no one more than us, but if it does check out our Warranty

Read Our Warranty